Scorpio Technology stocks a wide range of components to suit your needs.

NOTE: This page shows only a limited listing of our products. For a full listing of all our components see our Product Catalogue.

 

 O-RINGS

 

PULLEYS

 

PROPELLERS

 

PROPELLER SHAFTS, AXLES, GUIDE TUBES, COUPLING & BEARINGS

 

AXLE & PROPELLER SHAFTS

 

GUIDE TUBES FOR AXLE / PROPELLER SHAFTS

 

AXLE / PROPELLER SHAFTS & TUBE

 

COUPLING

 

BEARINGS & GUIDE ROLLERS

 

WHEELS

 

GEARS

The GEARS have a number of different hole sizes to suit different usages:
• Spur gears have a second (smaller) gear. For clarity all spur gears have the number of teeth listed for both larger and smaller gears
• Only the brass pinion gears listed should be used with the Faulhaber motors (Code: SMFAU). Plastic pinion gears are press-fit and are not recommended to use Faulhaber motors due to the risk of damage to the motor.

GEARS – 1.9 MM HOLE

The white gears with the 1.9 mm dia. hole are a press fit on to the 2.0mm diameter electric motor shaft.

GEARS – 2.4 MM HOLE

• The white gears with the 2.4 mm dia. hole are a press fit on to the 2.5mm diameter steel rod.
• 12T / 2.4 mm hole Pinion gears are very useful to use as retainers on a 2.5mm rod.

GEARS – 2.6 MM HOLE

The yellow gears with the 2.6 mm dia. hole are free spinning, on the 2.5mm diameter steel rod.

GEARS – 2.9 MM HOLE

The white gears with the 2.9 mm dia. hole are a press fit on to the 3.0mm diameter steel rod.

0.6 MODULE SPUR GEARS

These gears are not compatible with 0.5 module gears.

BRASS PINION GEARS - TO SUIT FAULHABER & SM403 MOTORS

GEAR RACK

GEAR ADAPTER

 

FRAMING COMPONENTS

For more framing components, see “BEARINGS”.

 

MOTOR, WHEEL & CHASSIS (suit Robot Buggy & Buggy 2WD Robot)

 

FASTENERS

BOLTS, NUTS & WASHERS

 

OTHER FASTENERS

 

SPACERS